Yeah the pumps in the tank. He had to change it a couple years ago and remembers seeing it, plus it just has the manifold block where the stock...
First off I'll start by sayin that I'm a 12 valve guy, but one of my buddies has an 02 24 valve that the lift pump is going out on. The pump thats...
In my chevy conversion I used a 6 speed out of a medium duty ford that was bolted up to a 6bt. I am going to use a np205 gear drive divorced...
I wont get into the engine there much, but I would take tear the 95 engine down and just see how bad it is, mabey you could get away with honing...
I used the glow plug controller in my 88 from a 6. 2. I think the ones from 94 up were all controlled by the ecu to activate the relay, but I...
How tall are the blocks in the first gens?
Thanks, i'll post there after work and see if there is a way to delete this then too, if not a mod can delete so its not clogging it up
Thank you, I looked for 20 minutes and it was just frustrating me.
Ive been known to be blind before, but I thought that I had seen a classified section at one time. I need some of the blocks that were on the 3/4...
Hmm??? everyone I talked to that has replaced them always use the ones that came out of that block, but no one has ever used an older block with...
Hello, I'm rebuilding my cummins for my truck, and i'm using an 89 block, and 95 style pistons for the inline pump. Now my question is that in my...
I know I work at a John Deere dealer as a mechanic, and you wouldnt believe the number of clutches that are on some of these tractors, with a...
