DDAMM (Drunk Drivers Against Mad Mothers) pushed for it so they could still buy beer. :D
Sure beats replacing manifold gaskets! Glad you got it taken care of.
Those pics were of a totally stripped cab that was for sale on eBay. This pic is of the hole that you have to stick your hand in and feel back...
The drain openings are rather large so it would take quite a bit to get plugged off. Any debris that is large enough or has somehow accumulated,...
What a load of crap!!
The only place the weld remained attached to both sides is near the very top. The rest of it looks like a broken arts & crafts piece where the hot...
Which one failed in the center? Every one of them peeled away on one side. If you save the pics, and zoom in super close, you can clearly see that...
Those booger welds look awfully cold to me. Also, you can see they've been cracked for a while since there's rust present. Better welding, and...
When I replaced my manifold gaskets, I ended up installing studs. New hardware is definitely better to work with. Also, chasing all the threads...
I didn't mention it, but check the gasket between turbo and manifold as well. With any luck, you might find a loose fastener. Just looked on...
It is most definitely an exhaust leak. The culprit is usually the gasket between the EGR cooler and manifold, but could also be one of the...
I remember hearing about this a year or two ago, and I pretty much forgot that it even happened. https://atmus.com/home
You could also calculate by distance if you wish. Drive 10 miles (according to your odometer) and compare to actual distance recorded by GPS. In...
Calculating the percentage you need is done by removing the adapter you have, and mounting the VSS directly to the trans. While using a GPS, drive...
You'll need a different speed ratio adapter. Once you figure how far off the speedometer is by percentage, you simply replace your existing...