What system does your truck has for an information system: IE such as APPLE CAR PLAY or something similar. My wife's 2021 Santa FE has Apple car...
I haven't gone to a dealer for my truck in 12 years for any service. They would screw the truck up if they did service it, mainly a gas truck...
X2, on the 5100 shocks by Bilstein. I installed them on my truck in April 2018. Very happy with them although I only have roughly 40,000 miles on...
I could be wrong, and I am sometimes but I just went out and drove my truck. Per the tach the engine RPMs in 5th gear at 1600 RPMs was per GPS...
Ok, I have a slightly older 3/4 2008 Dodge 6.7L truck with 4X4, 3:73 gears and 33" tires towing a 11,000 LB 5th wheel. I have put about 40,000...
You might have even thrown a wheel weight on one of the front tires. Some shops use stick on wheel weights on the inside of the rim. My tires are...
The Xtreme fog lights are just bulbs and the drivers to fool the CAN BUS system on the 2008 trucks. Otherwise the system thinks there is a lamp out.
I am using LED fog lights from Xtreme LED PRO. I installed them in 2019 and have had no issues what so ever. At the same time, I also installed...
John, Good luck on your approach to adding a temp probe to the pan. But there is a reason that tread bosses are place into any pan to allow...
Are you good at TIG welding and are you going to ensure that there is no slag in the transmission pan. This is why I went to the MAG-HYTEC pan...
I have to agree with OZI. The liberal left and for the most part the people in charge of several government agencies would have us all wrapped up...
I had my 2008, third gen truck recovered with leather seats covers that were OEM from Dodge. I also had new seat cushions put in the driver's...
My older son did use a Smarty for his 5.9L 06 truck. I believe there are 9 steps in the programmer he had. Using the three (3) should be ok for...
I am not sure that the stock transmission pan has a thread port for the temperature probe from your gage. That is one reason I went with the Mag...
I prefer to see what the temp is going into the transmission than afterward. So, my probe is on the pan. But I have added a MAG-HYTEC deep dish...