It worked great. Thanks. Sorry for the delayed response.
That is exactly what I need. How can I get one from you? Thanks, Doug
I used the stock banjo bolt and hooked up the Juice Attitude fuel pressure sender. I am getting readings of 16 psi idle, 15 psi cruising, and 13...
Okay, I used the stock banjo bolt. The new fuel line was bigger but I hose clamped it on and up and running. Thanks, Doug
What's the recommended way to hook up the Edge Juice Attitude fuel pressure gauge with the FASS 150/95-1008?
I installed the FASS part # 150/95-1008 today. But I have no idea what my fuel pressure is since the new FASS connector to the injector pump does...
Yep my FASS should be here Friday. And then I hope I'm done with the lift pump nightmares. Just to check, I pulled the line off the injector and...
I was using the Westach gauge and I replaced the sending unit. No change in pressure readings. I then hooked up the fuel pressure monitor on the...
A FASS Fuel Delivery system (FASS 150/95-1008) should be here on Friday. I will run these checks at that time so I know what was causing the problem.
Stopped by Cummins today and picked up a overflow valve. They called it a check valve. Installed it and it did not fix the issue.
Spoke to soon. The pressure is still not good. It is now going down to about 7psi idle. Then again after cycling the engine it goes back to 13psi....
Just went outside and cracked open the overflow valve on the vp44. Bumped the starter to bleed out the lines. Took it for a test drive and it...
So, did the thrid lift pump fix the problem?
Last night took the truck into town for dinner. I set the Juice Attitude on stock. Drove maybe 15 miles and the pressure was staying at 10 or 11...
