2011 rim for a 2003 1 ton longbed truck?

Discussion in '3rd Generation Ram Forum (NO engine/transmission topics) Archive' started by MBertero, Mar 14, 2018.

Thread Status:
Not open for further replies.

  1. MBertero TDR MEMBER

    HI 1ST TIME USER..... Was wondering if a stock 2011 17" rim would work with my truck? off set? bolt pattern is good, came with aftermarket rims that require 5 oz of weight wont balance out ? also is the offset for my 03 the same as the 2011? running 315x70x17 KO THANKS
     
    MBertero , Mar 14, 2018
    #1

  2. Killer223

    should work just fine. same axle and suspension.
     
    Killer223 , Mar 14, 2018
    #2

  3. JR

    They will work, as will the lug nuts if you get them. Up to 2011 used 9/16-18, 2012 and up went to M14 x 1.5.

    I don't recall the exact back spacing but I used a set of 17's off a 2012 on my 98 and had no issues running 285/75/17's (roughly 34").
     
    JR , Mar 14, 2018
    #3

  4. cerberusiam Staff Member

    Back space on 4th gen is 6.5", 3rd gen is 6.25". With a 315 tire you might get some rub on the control arms at full turn.
     
    cerberusiam , Mar 14, 2018
    #4

  5. MBertero TDR MEMBER

    ok thanks guys
     
    MBertero , Mar 15, 2018
    #5
Loading...
Similar Threads - 2011 rim 2003 Forum Date
Cream 2011?? 3rd Generation Ram Forum (NO engine/transmission topics) Archive Nov 16, 2010
2011 Calender and Nov/Dec/Jan TDR 3rd Generation Ram Forum (NO engine/transmission topics) Archive Nov 9, 2010
A sneek look at Fiat/Dodge 2011 model Diesel truck 3rd Generation Ram Forum (NO engine/transmission topics) Archive May 10, 2009
Thread Status:
Not open for further replies.

Share This Page